ES-Cushion &
ES-Barrier System

  • ES-Barrier
  • ES-Barrier

ES-BARRIER

ES-Barrier high moisture precured adhesive system with acoustic
and impact performance. For immediate flooring installation of LVT, VCT, vinyl and other sheet goods, carpet tile, rubber, engineered hardwood and more.

Good for RH Reading up to 99% RH
Suppresses sounds and room noise
Smooths out minor floor irregularities
Installs quickly and easily with ONE side coated
or DOUBLE BOND coated with EnviroSTIX™
Adhesive
Perfect for Use over in-floor heating
Hypoallergenic, Adhesive with NO VOCs or smell
CRI Green Label Plus-Ceritifed

Compression Set: @50% 31.5%
Indentation Force Deflection: @25% 677.2 lbs of force
Indentation Force Deflection: @65% Exceeds 5,000 lbs of force

* Separate moisture barrier should be used on slab foundation and below-grade installation
** Passes Castor Durability Test for 25,000 cycles when tested under minimum of 3 mm double-glued luxury vinyl plank and minimum 3.2 mm floating-click
*** When tested with floor-ceiling assembly

ES-Barrier Installation guide

ES-BARRIER MAX

ES-Barrier MAX high moisture precured adhesive system with acoustic and impact performance. For immediate flooring installation of LVT, VCT, vinyl and other sheet goods, carpet tile, rubber, engineered hardwood and more.

Good for RH Reading up to 100%RH
Suppresses sounds and room noise
Smooths out minor floor irregularities
Installs quickly and easily ONE BOND one side coated or DOUBLE BOND coated both sides coated with EnviroSTIX™ Adhesive
Perfect for Use over in-floor heating
Hypoallergenic, Adhesive with NO VOCs or smell
CRI Green Label Plus-Ceritifed

Composition: High-Density Synthetic Rubber
Density: 62 lbs/ft3 | 42 oz/yd2
Thickness: 0.0056″ | 1.42 mm
Moisture Barrier: See MB Primer
Color: Red
Castor Durability Test: Passes 25,000 cycles
Product Dimensions: 54″ x 44′ or 54″ x 22′
Length of Rolls: 100′ or 200′
Weight: Varies

ES-MBPES-ADHESIVE
BASESolvent-Free /Polyurethane ResinSolvent-Free, Acrylic Dispersion
FORMFluidSolid
COLORDark TranslucentClear
CURE TIME40-60 min one coatPre-Cured Immediate Access
INSTALL TEMP RANGE60° to 70° F*45° to 90° F*
WATER SOLUBILITYHydrolyzedNegligible
SURFACE PH RANGENeutralizes the PH7-14 PH
(No limit when used in with the ES-MBP)
COVERAGE2.5 Gallon / Unit: 1500 sf
(Spread rate will vary due to job site conditions)
Full even spread on the backing
of the flooring material
SHEET GOODS & MODULAR GOODS ATTIC SHELF LIFE1 yr unopened container
(at 70° F or 21 C) 30 days opened container (at 70° F or 21C)
5 Years*
VOC CONTENT------- 0 g/l (Out of 50 g/l Allowable) -------
WARRANTY---------------- 5-Year limited ----------------
*(Flooring manufacturer’s recommendations on storage, temperature, and shelf life supersede those of the ES-100.)


  • ES-Cushion
  • ES-Cushion

ES-CUSHION

ES Cushion modular carpet tile cushion offers a premium passive vibration isolation barrier for use under most types of modular tile. When the ES-Cushion is used, the transmission of sound vibration created by activity on the floor becomes largely isolated while passing through to the ceiling below. In addition, the high-quality design and density provides support and comfort underfoot, while also extending carpet life.

Made with synthetic rubber
Includes StainSTOP™ moisture barrier
Single or Double Bond High Moisture Resistant Adhesive
Features Guardian™ antimicrobial
CRI Green Label Plus-certified for indoor air quality
CRI Green Label Plus-Ceritifed

Compression Set: 15%
Method 601/12151
CLD PSI @ 25% Deflec. Min.: 7
CLD PSI @ 65% Deflec. Min.: 45
Min. ASTM-D2646
Breaking Strength PSI Length: 45
Breaking Strength PSI Width: 41

BENEFITS

  • Provides passive vibration isolation of sound transfer through floors.
  • Offers support while increasing carpet life.
  • Inhibits the growth of mold, mildew, and odor-causing bacteria.
  • Keeps spills from penetrating to subfloor.
  • 100% recyclable at the end of its useful life.

ES-CUSHION MAX

ES-Cushion modular carpet tile cushion offers a premium passive vibration isolation barrier for use under most types of modular tile. When the Modular PVI is used, the transmission of sound vibration created by activity on the floor becomes largely isolated while passing through to the ceiling below. In addition, the high-quality design and density provides support and comfort underfoot, while also extending carpet life.

Made with synthetic rubber
Includes StainSTOP™ moisture barrier
Single or Double Bond High Moisture Resistant Adhesive
Features Guardian™ antimicrobial
CRI Green Label Plus-certified for indoor air quality
CRI Green Label Plus-Ceritifed

ES-MBPES-ADHESIVE
BASESolvent-Free /Polyurethane ResinSolvent-Free, Acrylic Dispersion
FORMFluidSolid
COLORDark TranslucentClear
CURE TIME40-60 min one coatPre-Cured Immediate Access
INSTALL TEMP RANGE60° to 70° F*45° to 90° F*
WATER SOLUBILITYHydrolyzedNegligible
SURFACE PH RANGENeutralizes the PH7-14 PH
(No limit when used in with the ES-MBP)
COVERAGE2.5 Gallon / Unit: 1500 sf
(Spread rate will vary due to job site conditions)
Full even spread on the backing
of the flooring material
SHEET GOODS & MODULAR GOODS ATTIC SHELF LIFE1 yr unopened container
(at 70° F or 21 C) 30 days opened container (at 70° F or 21C)
5 Years*
VOC CONTENT------- 0 g/l (Out of 50 g/l Allowable) -------
WARRANTY---------------- 5-Year limited ----------------
*(Flooring manufacturer’s recommendations on storage, temperature, and shelf life supersede those of the ES-100.)